Datasheet, pdf

40 MHz , Digital Waveform Generators


  • 6U CompactPCI card
  • 40 MHz or 10 MHz maximum clock rates
  • -2.0V to +10V programmable levels, in 10 mV steps
  • Every 4 channels, can have different output levels
  • All outputs can be individually disabled (Tristate)
  • Hardware controlled differential output possibility (8-bit and 16 bit)
  • Triggers: start, stop, external
  • Up to 4096 Mbit (512 MB) of onboard signal memory
  • 8-bit output mode can be used to save memory
  • FIFO mode, up to 100 MB/s data transfer with PC
  • Multi-card synchronization

There are four high-speed digital pattern generator cPCI 6U size cards in the UC7200 range. Different cards have either 40 MHz or 10 MHz max clock rates, and the choice of 16 or 32 channels.

The UC7200 are designed for versatile digital waveform generation. All have the ability to output digital signals with a wide range of output levels. Each 4 bits can be independently programmed with different output levels for compatibility with different i.c. logic families, including: ECL, PECL, TTL, LVDS, LVTTL, CMOS or LVCMOS.

The standard board with 16 MB onboard memory can be expanded to a maximum of 512 MB (4096 Mbit).

  Maximum I/O rates
P/N Channels 8 bits 16 bits 32 bits
UC.7210 16 10 MS/s 10 MS/s -
UC.7211 32 10 MS/s 10 MS/s 5 MS/s
UC.7220 26 40 MS/s 40 MS/s -
UC.7221 32 40 MS/s 40 MS/s 40 MS/s

The cards are mainly used for digital recording or test pattern generation with a Device Under Test (DUT) in the electronics or semiconductor industry.


• Free SBench 5.x oscilloscope / data acquisition software 
• Free software drivers for Windows XP/2000/NT/98 and Linux
• Free source code example for c/c++, VB, Delphi 
• Optional drivers for MATLAB, LabView, DASYLab, Agilent-VEE

Board options • Cascaded Synchronisation 
• Star Hub Synchronisation
• Multiple Replay
• Gated Sampling 
• Time Stamp 
• Extra I/O TTL and Analog out