Customers
Resources
Datasheet, pdf

UC7005
125 MHz Digital Waveform Generator / Analyzer

 

  • 6U CompactPCI card
  • 125 MHz max clock on 1, 2, 4, 8 or 16 TTL channels
  • 1, 2, 4 or 8 channel memory saving mode
  • 1 kHz to maximum clock rate
  • Triggers: start, stop, pattern, change detection and pulsewidth
  • Up to 4096 Mbit (512 MB) of onboard signal memory
  • FIFO mode, up to 100 MB/s data transfer with PC
  • Multi-card synchronization

The UC7005 has been designed with a unique memory saving mode for applications that require less that 16 channels. All other boards from different manufacturers use from 16 to 32 memory bits for each sample, regardless of the number of active channels. This means if you are only using one channel then the amount of memory allocated to each sample could be wasting up to 31 bits.

The table below shows how a standard UC7005 with 16 MB or 512 MB of onboard memory uniquely allocates all of the available board memory to the active channels. Other memory options are available, the examples are chosen for illustration.

  UC7005 16 MB 512 MB
Channels used Mem depth Mem depth
16 8 Mbits / ch 256 Mbits / ch
8 16 Mbits / ch 512 Mbits / ch
4 32 MBits / ch 1024 MBits / ch
2 64 Mbits / ch 2048 Mbits / ch
1 126 Mbits / ch 4096 M bits / ch

The cards are mainly used for digital recording or test pattern generation with a Device Under Test (DUT) in the electronics or semiconductor industry.

Software

• Free SBench 5.x oscilloscope / data acquisition software 
• Free software drivers for Windows XP/2000/NT, 98 and Linux
• Free source code example for c/c++, VB, Delphi 
• Optional drivers for MATLAB, LabView, DASYLab, Agilent-VEE

Board options • Cascaded Synchronisation 
• Star Hub Synchronisation
• Multiple Recording 
• Multiple Replay
• Gated Sampling 
• Time Stamp 
• Extra I/O TTL and Analog out