Customers
Resources
Datasheet, pdf

UC6000
14-bit, Arbitrary Waveform Generators: 20 MS/s, 60 MS/s or 125 MS/s

 

  • 6U CompactPCI card
  • Up to 3 Vpp into 50 Ohm load
  • 1, 2 or 4 independent and synchronized output channels
  • Offset and amplitude programable
  • 3 software selectable reconstruction filters
  • Bank-switching mode
  • 1 kS/s to maximum output rate, each channel
  • Up to 512 MB of onboard signal memory
  • FIFO mode, up to 100 MB/s data transfer to PC
  • Multi-card synchronization

There are 8 different 14-bit Arbitrary Waveform Generator cPCI 6U size cards in the UC.6000 range. The cards are available with 1, 2 or 4 output channels and either 20 MS/s, 60 MS/s or 125 MS/s maximum channel output rates. Each channel can be independently set for offset, amplitude or filter.

A Bank-Switch mode is provided that allows the generated signal to be swapped between two signals stored in the onboard memory, on receipt of an external TTL signal.

With up to 512 MB onboard memory (256 MSamples), even the fastest signals can be generated for a long time. At slower speeds, the FIFO mode can be used to output longer signals with data transfer direct from the PC memory or hard disk.

  Maximum sampling rates
P/N 1 channel 2 channels 4 channels
UC.6011 20 MS/s 20 MS/s -
UC.6012 20 MS/s 20 MS/s 20 MS/s
UC.6021 60 MS/s 60 MS/s -
UC.6022 60 MS/s 60 MS/s 60 MS/s
UC.6030 125 MS/s - -
UC.6031 125 MS/s 125 MS/s -
UC.6033 125 MS/s 60 MS/s -
UC.6034 125 MS/s 125 MS/s 60 MS/s
Software

• Free SBench 5.x waveform generation software 
• Free software drivers for Windows XP/2000/NT, 98 and Linux
• Free source code example for c/c++, VB, Delphi 
• Optional drivers for MATLAB, LabView, DASYLab, Agilent-VEE

Board options

• Cascaded Synchronization
• Star Hub Synchronization
• Multiple Recording 
• Gated Sampling 
• Time Stamp 
• Extra I/O TTL and Analog out 
• High-speed digital output

UC6000 Amplifier Cards

Customers who require +/-10V output levels can now use the optional UC6000 Amplifier cards. These 3U cPCI cards have 1 to 4 amplifier channels with a fixed amplification. Each channel can deliver +/-10 V in high impedance or +/-5 V in 50 ohm termination. The amplifier card has a bandwidth of 30 MHz.

• UC6000-1Amp (1 channel)
• UC6000-2Amp (2 channels)
• UC6000-4Amp (4 channels)